Working with circuit boards and LED’s requires soldering experience. A temperature controlled soldering iron is required with ESD (Electrostatic Discharge) is highly recommended. Other tools (Safety First) recommended is a good pair of safety glasses, (You can find them at any hardware store.) 28AWG wire strippers, wire cutters, pliers and Electrical Tape.
DIY KIT Parts
(1) Circuit Board
(1) Traffic Advisor Housing
(1) Power Switch
(1) Tap Control Button
(1) 6" 9v Battery Snap
(1) 6" Red/Black Twisted Power Wires
(1) 8" Black/Black Twisted Tap Button Wires
(4) Male Quick Disconnects
(4) Female Quick Disconnects
(4) 1" X 3/32" Shrink Tube for QD
(2) 3/64" Shrink Tube for Tap Button
(8) LED's w/Any color of your choice
Continuous/cycle mode
9 speeds per pattern
Bright/dim mode
Enable/disable 15 minute auto off
3-12V DC
Manual