New Redesiged
Wig-wag Lights
New Redesigned
WIG-WAG Police Lights
1:18 Scale comes with 3mm LEDs
1:10 Scale comes with 5mm LEDs
This comes with 4 front white 5mm head light & one Red and one Blue LED's
This Wig Wag has 5 settings that match the ones you see in a real Police Car:
Bright/Dim Mode
Enable/disable 15 minute auto off
9V battery snap with Quick Disconnects
Tape Control Button with Quick Disconnects
Steady On - Slow Flash - Medium - Fast - Crazy Strobe.
Operation instructions
3-12V DC
FULLY ASSEMBLED UNIT INCLUDES 6 LED's.
All LED's are wired with 12 inches wires from the circuit board. The Circuit Board is about 1 inch long, less than 1 inch wide and 1/10th of an inch tall. A switch is wired 6 inches from the board. Press the switch once for steady on again for 2nd pattern, etc. 5th press turns it off. The 2 power leads connect to any 9 volt DC battery source The battery leads are 6 inches long to reach to the trunk. Hook these leads to a fresh 9 volt battery and you are on your way! There are no additional electronics required. We even include a FREE battery strap!
on/off switches are optional per request.
Copyright@2010.
